Step-by-step guidance

Slow WiFi can come from the internet service, a single device, WiFi interference, or the link between mesh units. Check each part in turn before changing settings or resetting your network.
Find out where the slowdown happens
Run a speed test on more than one device, close to the main Deco and then in the room where the issue appears. Use the same test service and pause large downloads or video streams during the comparison. If only one device is slow, restart that device and check for pending updates. If every device is slow, continue with the network checks below.
Check your internet service
If possible, compare a wired computer connected to the modem or gateway using the provider’s recommended arrangement. If a wired test is also slow, the issue may be outside WiFi; check for an outage or contact your internet provider. Do not connect or reconfigure equipment in a way that conflicts with your provider’s instructions.
Improve mesh placement
Place Deco units in open areas, away from cabinets, large metal objects, and other sources of interference. A satellite unit needs a good connection back to the main unit; placing it farther from the main Deco does not necessarily improve coverage. Move it closer and retest. Allow a short period for the mesh to reconnect after moving it.
Review basic network status
Open the Deco app and check whether the main unit and other units appear online. Restart the modem and Deco units following your provider’s and model’s recommended order. Wait for both to reconnect before testing again. Check for app or firmware updates from the official app when convenient, and read update prompts before proceeding.
If speeds are still inconsistent, record the device, room, test time, and whether the issue affects one or every device. This helps separate a device-specific problem from service or mesh coverage issues. See WiFi connection troubleshooting or review other Deco WiFi guides.
For further help, explore our independent TP Link Deco support services or contact our team with a non-sensitive description of the issue. Do not send passwords or verification codes.

