Step-by-step guidance

Two white mesh WiFi units arranged in a bright modern home

Deco setup is usually completed with the TP-Link Deco app. The exact prompts depend on your model, app version, and internet provider, so use the in-app instructions for your device rather than relying on a single universal setup sequence.

Prepare for setup

Find the model name on the Deco unit and keep the power adapter and Ethernet cable nearby. Make sure your modem or internet gateway is working. Install or update the official Deco app, and have access to the TP-Link account you intend to use. Do not post account passwords, WiFi passwords, or one-time codes in a support message.

Add the main Deco

  1. Power off the modem or gateway if its instructions recommend that before connecting another router.
  2. Connect the primary Deco to the modem using Ethernet. Use the port indicated by your model’s instructions; port behavior can differ by model.
  3. Power on the modem and allow it to finish starting. Then power on the Deco and wait for its setup indicator.
  4. Open the Deco app, sign in, and follow its prompts to add a new Deco device.
  5. Select the correct model and internet connection type when prompted. If you are unsure about ISP-specific connection details, check your provider’s documentation before changing advanced settings.
  6. Choose a network name and a strong WiFi password that is different from your TP-Link account password.
  7. Wait for the app to confirm that the main unit is online before moving on.

Add other Deco units

Place additional units in an open location between the main Deco and the area that needs coverage, rather than at the very edge of a weak signal. Power on one unit at a time and add it through the app’s add-Deco flow. Wait for the app to confirm connection before adding the next unit. Once the system is running, adjust placement if the app reports a weak connection or coverage remains poor.

If setup gets stuck

Check that the phone is connected to a working network, that Bluetooth and local network permissions are allowed if the app requests them, and that the main Deco is connected to the modem. Restart the app and follow the on-screen recovery steps. Avoid resetting a working network unless the model-specific instructions recommend it; reset can remove saved settings.

See our mesh setup guidance or explore more Deco setup guides.

For further help, explore our independent TP Link Deco support services or contact our team with a non-sensitive description of the issue. Do not send passwords or verification codes.

Need help with a Deco issue?

Get independent guidance for common login, setup, WiFi, and network management questions.

Contact Our Support Team